Fiberglass reinforced epoxy tube
Fiberglass reinforced epoxy tubes can bear the heat up to 180 centigrade with the high mechanical strength and accurate dimension. The tolerance in both inside and outside diameter is not more or less than 0.02mm.
High density and mechanical strength.
Special treatment can be made on inner and outer surfaces on request.
High strength of threads.
Item |
Unit |
Standard |
||
EPGF51 |
EPGF52 |
EPGF53 |
||
Flexural Strength |
Room Temp 155℃ |
≥400 ___ |
≥400 ≥200 |
≥400 ___ |
Compressive Strength |
MPa |
≥150 |
≥150 |
≥150 |
Adhesive Strength |
MPa |
≥100 |
≥100 |
≥100 |
Flame resistance |
___ |
___ |
___ |
V0 |
Dielectric Strength in Perpendicular direction (in oil 90℃) eg: 5min T:1.0mm 1.4mm 1.8mm 2.2mm ≥3mm |
KV/mm |
≥11.6 ≥10.4 ≥9.4 ≥8.7 ≥7.0 |
≥11.6 ≥10.4 ≥9.4 ≥8.7 ≥7.0 |
≥11.6 ≥10.4 ≥9.4 ≥8.7 ≥7.0 |
Dielectric Strength in Parallel direction (in oil 90℃) eg: 5min |
KV |
≥40 |
≥40 |
≥40 |
Water Absorption |
% |
≤0.2 |
≤0.2 |
≤0.2 |
Insulation resistant in water |
Ω |
≥1.0×109 |
≥1.0×109 |
≥1.0×109 |
Density |
g/cm3 |
≥1.7 |
≥1.7 |
≥1.7 |